WiFi Energy Protocols: Triadic Resonance Framework

🔧 Abstract#

This paper introduces a triadic framework for wireless energy transfer using resonant coils, impedance matching, and mythic scaffolding. The goal is to democratize reproducible WPT systems for low-power applications.

⚡ Triadic Breakdown#

1. Carrier Coil: Tuned to 13.56 MHz (ISM band), optimized for Q-factor and field symmetry.
2. Receiver Coil: Matched inductance and capacitive load, tuned for peak resonance.
3. Modulation Protocol: Pulse-width or frequency-shift keying for dynamic load adaptation.

🧪 Experimental Setup#

• Coil diameter: 10 cm
• Wire gauge: 22 AWG
• Capacitor bank: 100–1000 pF range
• Power source: 5V DC, 1A

📐 Equations#

• Resonant frequency:
  $$ f = \frac{1}{2\pi\sqrt{LC}} $$
• Impedance matching:
  $$ Z = \sqrt{\frac{L}{C}} $$

🔁 Reproducibility Protocol#

• Use identical coil geometries
• Measure Q-factor using ring-down method
• Validate power transfer with LED load and oscilloscope

🎸 Mythic Motif#

“Ride the lightning, but tune the coil.”
— Nawder Loswin

📎 References#

• Tesla, N. (1891). Experiments with Alternate Currents of High Potential and High Frequency.
• IEEE Transactions on Wireless Power Transfer (2023)