Lab‑01 — Baseline Resonance Detection
Objective:
Calibrate and test resonance detection apparatus across one spectral band.
Setup:
- Equipment: Prototype or simulated Resotector sensor
- Calibration source: Known resonance emitter
- Tools: Data logger, calibration software
Procedure:
- Set sensor to baseline mode.
- Run calibration sweep using known emitter.
- Record raw signal amplitude and noise profile.
- Calculate detection threshold ( T_r ) as in
/equations/equations.md.
Expected Outcome:
Accurate detection threshold aligned with theoretical value.
Next Steps:
Submit calibration logs via the Resotectors validator passport.